LabCare Water Bath Disinfectant Solution
SKU: 093051354
LabCare Water Bath Disinfectant Solution
Antimicrobial Concentrate for Laboratory Water-Bath Maintenance
LabCare Water Bath Disinfectant Solution from MP Biomedicals is an antimicrobial concentrate formulated to help manage microbial contamination in laboratory water baths. Routine water-bath operation can allow microorganisms and environmental debris to accumulate over time, potentially affecting water-bath cleanliness.
When used at the recommended dilution and maintenance interval, LabCare Water Bath Disinfectant Solution helps inhibit microbial growth and supports routine laboratory water-bath hygiene. It is intended to complement regular cleaning and water replacement procedures.
How It Works
The manufacturer describes a dual-component antimicrobial formulation based on quaternary ammonium compounds and isothiazolinone agents. These antimicrobial components are used to help control microbial growth in laboratory water-bath water under recommended use conditions.
Always follow the current product label, Safety Data Sheet (SDS), and water-bath equipment manufacturer's guidance when preparing, handling, and using the solution.
Research Laboratory Applications
- Routine Water-Bath Maintenance: Helps manage microbial growth in laboratory water baths as part of scheduled maintenance procedures.
- Laboratory Contamination Management: Supports water-bath hygiene in molecular biology, cell biology, and other research laboratories.
- Laboratory Hygiene Workflows: Complements routine water-bath cleaning and scheduled water replacement.
Recommended Use
Follow the current manufacturer instructions and laboratory safety procedures when using LabCare Water Bath Disinfectant Solution.
| Dilution Ratio | 1:500 |
| Example Preparation | Add 20 mL of concentrate to 10 L of water and mix thoroughly. |
| Treatment Interval | Every 7–10 days, according to manufacturer instructions and laboratory conditions. |
| Water Replacement | Manufacturer guidance recommends replacing bath water every 1–3 months, depending on operating conditions. |
| Safety Precautions | Use appropriate personal protective equipment (PPE). Refer to the current SDS and equipment manufacturer requirements. |
Product Information
| Product Name | LabCare Water Bath Disinfectant Solution |
| Catalog Number (500 mL) | 093051354 |
| Catalog Number (100 mL) | 093051349 |
| Magento Family SKU | 0930513-CF |
| Application | Laboratory water-bath microbial control and maintenance |
| Intended Use | Research Use Only (RUO) |
For laboratory research use only. Follow the current product label and Safety Data Sheet for handling, storage, and disposal instructions. This product is not intended for household, medical, or patient use.
Application Notes
LabCare Water Bath Disinfectant Solution is intended for inhibiting and removing microorganisms from water in water baths or incubator tanks
Usage Statement
Research Use Only (RUO)
| SKU | 093051354 |
| Application Notes | LabCare Water Bath Disinfectant Solution is intended for inhibiting and removing microorganisms from water in water baths or incubator tanks |
| Pack Size | 500 ml |
| Storage | RT for 3 years |
| Usage Statement | Research Use Only (RUO) |
1. What is LabCare Water Bath Disinfectant Solution used for?
LabCare Water Bath Disinfectant Solution is used to help inhibit and control microbial growth in laboratory water-bath water as part of routine bath maintenance. It is intended for research and laboratory use.
2. How do I dilute LabCare Water Bath Disinfectant Solution?
The manufacturer recommends a 1:500 dilution. For example, mix 20 mL of solution into 10 L of water. Follow the current product instructions and laboratory safety procedures.
3. How often should I treat the water bath?
The manufacturer instructions recommend treating the water every 7–10 days. Actual maintenance needs depend on laboratory use and contamination conditions.
4. Does this solution replace regular water-bath cleaning?
No. Routine water replacement and cleaning are still needed. The manufacturer recommends replacing bath water approximately every 1–3 months and cleaning the bath when changing the water.
5. What microorganisms is the solution designed to control?
Manufacturer materials describe antimicrobial activity against bacteria, fungi, mycoplasma, and algae when used under recommended conditions. Performance depends on correct use and laboratory conditions.
6. Can I use tap water in the water bath?
The instructions permit tap, distilled, sterilized, or purified water, with distilled, sterilized, or purified water recommended. Follow your water-bath manufacturer's requirements.
7. Is LabCare Water Bath Disinfectant Solution the same as the incubator water product?
No. MP Biomedicals offers a separate LabCare Incubator Water Disinfectant Solution for incubator water pans. Choose the formulation intended for the equipment and application.
8. What pack sizes are available?
The manufacturer manual lists 100 mL (Catalog #093051349) and 500 mL (Catalog #093051354). Availability may vary by region.
9. Where can I find handling and safety instructions?
Consult the current MP Biomedicals product instructions and Safety Data Sheet (SDS). Appropriate personal protective equipment and laboratory handling controls are required.
Powered by Bioz
